Showing 81–96 of 126 results
Costar Tile Fix 5 is a high polymer modified formulated for fixing low porosity vitrified floor of normal size in internal and external areas.
The adhesive can be used for fixing ceramic tiles on floor of normal size in internal and external areas.
The adhesive can be used for fixing ceramic tiles on floor only and is suitable for dry areas for internal and external application.
Costar Top 10 is a clear sodium silicate-based solution which chemically reacts with soft free lime and calcium carbonate compounds in concrete to densify and create chemically resistant surfaces. It is used to cure, harden and seal fresh or hardened concrete.
Costar Top 100 contains special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size. It is specifically designed for hardening of freshly placed concrete Costar Top 100 provides a highly abrasion resistant surface for concrete floors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to light-heavy traffic.
Costar Top 20 is a low VOC lithium silicate-based solution used to densify, harden, seal and protect fresh or hardened concrete. It is formulated to work fast while deeply penetrate and reacting with concrete components (pozzolans, cement, and most aggregates) to fill micro voids and allow concrete to polish faster while improving water and stain resistance.
Costar Top 200 is a hard wearing, factory blended ready to use cementitious system with a blend of 100 % pure emery-tuff and special fillers that hardens freshly poured concrete.
Costar Top 200 provides a highly abrasion resistant surface for concrete floors by the dry shake-on method which ensures that the hardwearing surface bonds monolithically to the base concrete. They are ideally suited for all industrial areas subject to very heavy traffic.
Costar UW Mortar is a ready to use, quick setting cement-based underwater mortar. The powder, when mixed with water, produces a mortar which is wash-out resistant and waterproof. It was explicitly designed for underwater repair works.
Costar wall putty is specially developed as a base coat to provide smooth finish on plastered surface, and hence ideal for paint application because paint saving can be up to 50%. It contains finest quality minerals, polymers, white cement and pigments.
Costar wall putty has good waterproofing and water resistant properties. It particularly offers protective against wind rain when used for external application.
COSTAR Zinc Primer 10 represents a technologically advanced solution, characterized by its singular composition as a one-component, cementitious coating meticulously engineered to combat corrosion effectively, specifically devised to safeguard steel reinforcement and serve as a robust bonding agent for concrete surfaces. COSTAR Zinc Primer 10 primer stands as an indispensable component within the realm of protective coatings. Its formulation exhibits a precise synergy of ingredients aimed at enhancing durability and resilience against the corrosive forces that threaten steel infrastructure. Furthermore, its compatibility with a wide range of Costar repair products & underscores its versatility and suitability for diverse construction and maintenance applications.
Costar Primer 20 is a two-component liquid based metallic zinc and epoxy resins, designed for use as a rust inhibitor for priming exposed reinforcement steel bar where chloride induced attack on steel and concrete is involved. It is compactable with costar repair product and used under non-immersion condition.
COSTARCEL 100 is a chloride-based concrete set accelerator, supplied as a ready-to-use liquid admixture. It significantly accelerates the initial setting time of mortar and concrete, making it up to three times faster than normal, without causing any adverse effects on other concrete and mortar properties.
By incorporating COSTARCEL 100, workability and strength of the mixture are improved while promoting faster cement hydration. This results in easier placement of the mix and speeds up construction by reducing the initial set and curing time, all without causing any slump loss. The use of this admixture allows for earlier removal of formwork and other protective measures and enables an earlier start to finishing, saving both time and labor.
In applications requiring very high early strengths under normal and hot weather conditions, COSTARCEL 100 performs exceptionally well. It is specifically designed for situations where early stiffening (slump loss) is not desirable, yet high early strengths must be achieved within a specified time frame.
COSTARCEL 200 is a ready-to-use liquid accelerating admixture for concrete. It accelerates initial setting time one to three times faster than normal mortar and concrete without adversely affecting other properties of concrete and mortar.
COSTARCEL 200 improves workability and strength while hastening the hydration of cement. It makes the mix easier to place and speeds construction by shortening the initial set and curing time without resulting in slump loss. Time and labor are saved because formwork and other protection can be removed earlier and finishing can be started.
COSTARFLO 100 is a cementitious self-leveling single component product, suitable for use in light to Medium-duty internal applications on new or existing substrates in order to receive all kinds of flooring covering. It has good abrasion resistance and provides a tough surface.
COSTARFLO 200 is a cementitious self-leveling single component product, suitable for use in light to Medium-duty internal applications on new or existing substrates in order to receive all kinds of flooring covering. It has good abrasion resistance and provides a tough surface.
Costarflo 300 is heavy duty cementitious self-leveling over-layment for concrete floors. It creates an abrasion resistant smooth surface which can be used as a high strength underlayment for coatings and floor coverings; it can also be used as a decorative finish in show rooms, offices and malls when polished.
Costarflo 400 is fast setting, heavy duty cementitious self-leveling overlayment for concrete floors. It creates an abrasion resistant smooth surface which can be used as a high strength underlayment for coatings and floor coverings; it can also be used as a decorative finish in show rooms, offices and malls when polished.
Costaflor 600 EMS is a three-component solvent free heavy duty non-shrink epoxy resin-based mortar for patching and screeding industrial floors. It is designed for application or thickness ranging from thickness of 3- 10 mm and above. It is used where heavy duty flooring is required with mechanical and general chemical resistance.
