Costar Tile Fix 5

Costar Tile Fix 5 is a polymer modified, thin-set tile adhesive for ceramic tiles in internal areas. It is suitable for both vertical wall (upstand) and horizontal (floor) application over cementitious substrate. It is supplied as a dry-mix mortar, to which water needs to be added before application.

Download DataSheet

Description

Costar Tile Fix 5 is a high polymer modified formulated for fixing low porosity vitrified floor of normal size in internal and external areas.The adhesive can be used for fixing ceramic tiles on floor of normal size in internal and external areas.
The adhesive can be used for fixing ceramic tiles on floor only and is suitable for dry areas for internal and external application.
This is also suitable for tile-on-tile application fixing vitrified tile on pre-existing ceramic tile floors.

Advantages

  •  Very High Bond strength.
  • The free-flowing product makes it easier to mix and apply, easy-to-use.
  •  Useful for bed thickness of 3-15mm. May go up to 15 mm in a limited extent for wall & floor
    application.
  • Thixotropic formula – no sag, for the easy application on wall.
  •  Low VOC – For a healthy living.
  • For installation of vitrified tiles on floor
  • Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
  • Self-curing properties, this allow for no hassle application with minimum labor.

Area of Use

  • Laying tiles over cementitious waterproofing
  • Tiling of interior and exterior facades of the building which are exposed to outside weather conditions.
  • Bonding of tiles on existing tiles
  • All type of low and high absorption tiles
  • Suitable for horizontal application
  • Suitable for normal sized ceramic and vitrified tiles
  • For tiling of sound surfaces of concrete and non-sand surfaces such as; gypsum bond, particle board,
    plywood and other large scale stones.