COSTAR TILE FIX 10

Description

Costar Tile Fix 10 is a high polymer modified formulated for fixing low porosity vitrified floor of normal size in internal and external areas. The adhesive can be used for fixing ceramic tiles on floor of normal size in internal and external areas.

The adhesive can be used for fixing ceramic tiles on wall and floor and is suitable for dry as well as wet areas for internal and external application. This is also suitable for tile-on-tile application fixing vitrified tile on pre-existing ceramic tile floors.

Advantages

• Very High Bond strength.
• The free-flowing product makes it easier to mix and apply, easy-to-use.
• Useful for bed thickness of 3-15mm. May go up to 15 mm in a limited extent for wall & floor application.
• Thixotropic formula – no sag, for the easy application on wall.
• Low VOC – For a healthy living.
• For installation of vitrified tiles on floor
• Suitable for Tile-on-tile application of vitrified tiles on pre-existing ceramic tile floors.
• Self-curing properties, this allow for no hassle application with minimum labor.
• No excessive hacking of the substrate required to achieve the required bonding.
• To be applied internally and externally on ceramic flooring and indoor walls.
• Suitable for ceramic tiles with a medium high absorption rate.
• Non slip
• Excellent initial adherence strength on both horizontal and vertical plane.
• Excellent Waterproofing properties adding a bonus benefit.

Area of Use

• Laying tiles over cementitious waterproofing.
• Tiling of interior and exterior facades of the building which are exposed to outside weather conditions.
• Bonding of tiles on existing tiles
• All types of low and high absorption tiles
• Suitable for both vertical and horizontal application
• Suitable for normal sized ceramic and vitrified tiles
• For tiling of sound surfaces of concrete and non- sand surfaces such as; gypsum bond, particle board, plywood and other large scale stones.